ST 180 Pneumatic Deep Drilling Rig Machine
Product Description
The ST-180 stands out for high efficiency, low maintenance, and strong adaptability, ideal for hard rock wells, remote areas, and high-altitude projects..It is widely used in industrial and agriculture water project, testing well and other exploration borehole. In particular, drilling hole for geothermal heating, it can also meet the engineering basis for reinforcement, loose gravel drilling rock information connected with a variety of engineering. Our drilling rigs are more efficiency and with low failure rate, more economic and durable, and with a high comprehensive cost performance.
Product Tech Details
| Product Name ST 180 Water Well Drilling Rig |
| Drilling Diameter | 140-254 mm |
| Drilling Depth | 180 m |
| Drill Rod Diameter | 76/89 |
| Air Consumption | 17-31 m3/min |
| Working Pressure | 17-25 bar |
| Swing torque | 3200-4600 Nm |
| Drill Pipe length | 1.5 m 2.0 m 3.0 m |
| Dimension (L*W*H) | 3800*1500*2820 mm |
| Unit Weight | 4500 kg |
| One-time advance length | 3.3 m |
| Walking speed | 2.5 km/h |
| Compensation | 1000 mm |
| Rig lifting force | 16 T |
| Swing speed | 45-65 rpm |
| The engine brand | Yuchai /Xichai |
| High leg stroke | 1.4 m |
| Climbing angles (Max) | 30° |
| Equipped with hammer | Medium and high wind pressure series |
Product Advantages
1)Greater fuel efficiency and energy saving
2) Air filtration system with vacuum indication for dust environments
3) Compressor oil and engine coolant coolers to optimize performance and extend engine life
4) Efficient compressor oil filter
5) Fuel filter with water separator
6)Easy to remove, translucent PE fuel tank
Product Application
It can be applied to various strata, used in water well engineering, geothermal well, anchor pile holeand so on, and can be used with follow-pipe drilling. It has the advantages of whole machine hydraulic control, automatic loading and unloading drill pipe, crawler type chassis, large horsepower diesel engine, four hydraulic support leg balance, stronger terrain application ability and so on.
Hard Rock Drilling
Edge: High-frequency impact + automatic cuttings removal; granite drilling speed: 2-3m/hour.
Case Study: A 150m well in Ethiopian granite completed in 72 hours.
Remote Area Operations
Edge: Fully pneumatic (no electricity); modular design allows transport via pack animals.
Case Study: Successful Himalayan village water project (Nepal) at 3,800m altitude.
Cost Efficiency
Energy: Saves 40% fuel vs. hydraulic rigs (for a 200m well).
Maintenance: Eliminates hydraulic oil costs; annual savings: $2,000+.
Product Tags:
|
|
Water Well Rubber Crawler Mounted Power Pneumatic Drill Rigs 150-180 Meters Images
|
